EP-L Series 2

Supported Load

• A 12 Vdc load for emergency lamps.

Battery

• Lithium-ion 11.1V- 5000 mAh.

Power Supply Duration

• It can supply a 9 Watt load for 3 hours, a 15 Watt load for 2 hours

Functions

• An automatic 30-minute test can be set to perform every 30 days. This automatic testing can be turned on or off.

Circuit Sytems

• Controlled by an 8 bit microcontroller circuit.
• An Autoactivation circuit when under voltage occurs.
• A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned.

Protection Features

• AC and DC fuse to prevent current overload.
• Surge Protection.

Features to Extend Battery Life

• An innovative 3 Steps Charger (Limit Current, Constant Voltage, Flip-Flop Charger).
• A Low Voltage Cut-Off to prevent the battery from draining completely.

Warning Systems

• An audible alarm will sound once every 15 seconds to warn that the Low Voltage Cut-Off is about to activate.
• An audible alarm will sound twice every 15 seconds to indicate that the battery should be charged.
• An LED will blink 3 times every 15 seconds to warn that there is less than 30 minutes of charge left in the battery. This warning will show for 10 minutes.
• An LED will blink 4 times every 15 seconds to warn that there is a problem charging the battery.

DOWNLOAD SPEC SHEET
| EP-LS1 |